Rub-R-Roof (Acrylic): Elastic, Reflective Roof Protection for Commercial and Low-Slope Roofs

Not every roof needs the extreme ponding-water performance of silicone. Many commercial and low-slope roofs benefit more from a highly elastic, UV-reflective, breathable coating that strengthens the roof surface while improving energy efficiency. That’s exactly where Rub-R-Roof (Acrylic) shines.

Designed for metal, modified bitumen, asphalt BUR, EPDM, PVC, Hypalon, and even concrete roof decks, Rub-R-Roof (Acrylic) is a 100% acrylic elastomeric coating engineered to restore weathered roofs, seal small cracks, and create a bright white, reflective surface that helps reduce building heat gain.

If you’re looking for a cost-effective, high-performance roof coating that can dramatically improve roof longevity and energy efficiency, Rub-R-Roof (Acrylic) is built for the job.

Why Choose Rub-R-Roof (Acrylic)?

Contractors rely on Rub-R-Roof (Acrylic) because it strikes a highly desirable balance between performance, elasticity, and affordability.

100% Acrylic Elastomeric Formula

Offers rubber-like flexibility to handle building movement, thermal cycling, and seasonal expansion and contraction.

Bright White, High-Reflectivity Finish

Initial reflectivity of 0.85 and aged reflectivity of 0.76 dramatically reduce rooftop temperatures, helping offset cooling costs.

Elastic & Crack-Resistant

With 240% elongation and 275 psi tensile strength, Rub-R-Roof (Acrylic) flexes with the building instead of cracking or peeling.

Compatible with Many Roof Types

Use Rub-R-Roof (Acrylic) on:

• Metal roofs

• Modified bitumen

• Asphalt BUR

• EPDM

• PVC

• Hypalon

• Concrete roofs

• Masonry walls

  
  

Energy-Efficient & Code-Compliant

Meets ASTM D6083 Type I, supports Urban Heat Island provisions, and is approved under the Florida Building Code.

How Rub-R-Roof (Acrylic) Works

Rub-R-Roof (Acrylic) forms a flexible, breathable membrane that renews and protects aging roof surfaces.

1. Fully Elastic Waterproof Membrane

The 100% acrylic resin system stretches with rooftop movement while maintaining surface adhesion and film integrity.

2. Multi-Coat System for Durability

A Rub-R-Roof Acrylic system requires:

• A #1000 series acrylic base coat

• Followed by Rub-R-Roof (Acrylic) topcoats at 1.25–1.5 gal/100 sq. ft. per coat

  
  

This creates a pin-hole-free, uniform membrane.

3. Reinforced Restoration System (Optional)

For full roof encapsulation or severely weathered substrates:

• Embed 40” polyester fabric into 2 gal/100 sq. ft. of base coat

• Add two acrylic topcoats at 1.5 gal/100 sq. ft. each

  
  

4. High Solar Reflectivity

With an SRI (Solar Reflectance Index) of 107, Rub-R-Roof (Acrylic) significantly lowers roof temperatures and helps improve building energy performance.

Important Installation Considerations

Rub-R-Roof (Acrylic) installs easily with roller or spray equipment, but proper preparation is critical:

• Must be applied above 40°F with rising temperatures

• Avoid application when rain is expected within 48 hours

• Avoid applying to hot surfaces above 100°F

• Always clean roof with Rub-R-Wash (Lucas #115) first

• Seal fasteners, seams, and penetrations with acrylic mastic

  
  

Ponding Water Notice

Like all acrylic coatings, extended ponding water severely diminishes service life and can cause adhesion failure.

For roofs with ponding issues, the silicone version is the correct choice — not acrylic.

Technical Performance Snapshot

• Viscosity: 70,000 cps

• Solids by Volume: 52%

• Dry Film Build: 8 mils per gallon

• Tensile Strength: 275 psi

• Elongation: 240%

• Initial Reflectivity: 0.85

• Aged Reflectivity: 0.76

• Emissivity: 0.89

• VOC: <50 g/L

• Colors: White, Tan, Gray, Custom options

These properties place Rub-R-Roof (Acrylic) among the industry’s top-performing acrylic elastomeric coatings.

Rub-R-Roof (Acrylic) vs. Silicone: Which Should You Choose?

Use Acrylic when:

• The roof does not have ponding issues

• You want maximum reflectivity + cost efficiency

• You want a breathable, flexible membrane

Use Silicone when:

• Ponding water is present

• You want the highest long-term moisture resistance

Ideal Applications for Rub-R-Roof (Acrylic)

• Metal roofs

• Modified bitumen

• Asphalt BUR

• Aged EPDM & TPO (with proper prep)

• PVC roofs

• Commercial buildings

• Schools & government facilities

• Retail & multifamily properties

Acrylic is especially effective for large, dry commercial roofs where reflectivity and cost efficiency are top priorities.

The Bottom Line: Reliable, Reflective, Cost-Effective Roof Renewal

Rub-R-Roof (Acrylic) gives contractors and property owners a high-performance solution that:

• Extends roof life

• Improves energy efficiency

• Adds flexibility and UV resistance

• Applies quickly with roller or spray

• Costs far less than a full tear-off

• Meets strict code requirements

It’s the smart choice for restoring aging roofs that don’t face ponding-water challenges.

Restore Your Roof the Smart Way

Ready to extend the life of your low-slope roof? Rub-R-Roof (Acrylic) delivers performance, flexibility, and energy savings — at a fraction of the cost of replacement.